~
Item
Specifications
Voltage
AA Alkaline 1.5 Batteries (LR6) 4EA or 8EA (6V)
Emergency
Power
Source
9V Battery (6LF22) (Separately sold)
Operation
Method
Electronic Control Method (Password entry or card or
key tag reading)
Weight
4.1 kg (including both inner and outer bodies)
Product
Dimensions
Outer Body
(including
the handle)
88.1mm (W) X 392.4mm(H) X 64.5mm(D)
Inner Body
(including
the handle)
88.5mm (W) X 357.6mm(H) X 69.3mm(D)
Double authorization mode requires both card and password to open the
door, ensuring more security.
To setup the double authorization mode, more than 1 card must be registered.
Battery Replacement Alarm Generation
If the melody of “Blues for Elise” sounds when opening the door with the
password or a card (key tag), it is time to replace the batteries.
(The low battery indicator is lighted when the melody sounds.)
Replacing the Battery
Replace all 8 batteries within a 1 week of the first alarm sound.
- The unit will stop operating suddenly if the batteries are not replaced.
If the batteries are not replaced after their replacement time comes, they will
be completely discharged and the lock will not operate.
Purchase an emergency battery (9V) at the nearest store.
- As the alkaline batteries offer longer life, they are recommended over the
manganese batteries or rechargeable ones.
Place the card or key tag on the card reader, or enter the password, while
the 9V battery is connected to the external power port of the outer body.
This function generates the alarm sound when fire is detected so that the
residence can quickly respond. The built-in fire detection function is a basic
function of the lock, and cannot be released by the user.
Fire detection function is operational at about 70 °C ± 10 °C; this can vary
depending on the installation environment.
When fire occurs, the temperature sensor detects it and flashes the [Close] button
while generating the alarm sound.
The door is automatically opened after the alarm sound has stopped.
(The lock resumes normal operation if the inside temperature returns to
a normal level.)
The built-in fire detection function is activated when the temperature rises around
60°C, which may differ depending on the installation environment.
●
The contents of this user guide are subject to change without prior notice
to the user in order to enhance performance of the product.
●
Depending on battery manufacturer, date of manufacture and the user
environment, the duration of use may vary.
(In the case of average use, given as 10 times a day, 8 AA alkaline
1.5Vbatteries can last for 10 months.)
●
If the poles of the batteries are not placed properly, the lock will not
operate normally.
●
Liquid leaks from batteries can damage the product. Check the batteries
regularly (every 6 months).
●
After the battery replacement alarm has sounded, password/card
information cannot be registered, changed, deleted, initialized or
configured until the batteries are replaced.
Warning
10
11
12
7
8
9
Double Authorization Mode Setting
Replacing the Batteries
Using the Emergency Battery
Built-in Fire Detection Function
Product Specifications
You can set the security mode suitable for your use when you open the
door using a password.
Briefly press the [Register]
button on the inner body.
DING
DONG
[7] Button : Multi-leveled Security
Code Entry Mode
[9] Button : Common Mode
Press the [
] button after pressing the
[7] or [9] button, and the security mode
will be set.
DING DONG
DENG
Multi-leveled Security Code Entry Mode Setting
The welcome function is a convenient function that automatically activates
the authorization standby mode when a user approaches the door, even
before touching the number pad.
Open the battery cover and
press [Registration] button
briefly.
DING
DONG
DING DONG
DENG
Welcome Function On/Off
[1]+[
] button: Welcome function on, the one-
minute alarm function on
[2]+[
] button: Welcome function on, the one-
minute alarm function off
[3]+[
] button: Welcome function off
On and Off / Function Description
- Welcome function on: The mode will automatically activate the authorization
standby mode when a user approaches the door lock.
- Welcome function off: The mode will authorize a user when the user enters the
password on the number pad or connects a card to the number pad.
- One-minute alarm function on/ off: When someone remains in front of the door lock
for more than a minute, this mode will sound the tamper prevention alarm.
●
The factory defaults are set with the welcome function on and the alarm
function off.
●
The working distance of the infrared sensor can differ depending on light
conditions and other environments. When the front door is exposed to
sun light or constant bright lights it is advised to limit the usage of the
sensor as it might sound the alarm.
Caution
This function generates the alarm sound when an attempt is made to forcefully
open the door from the inside or the outside.
(This is a basic function of the lock, and cannot be separately set or released.)
If the door is forcefully opened while locked, the door opening sensor
detects it and generates the alarm sound.
Intrusion Detection Function
This function sets the time interval between the moment the door open/closed
sensor recognizes the door as closed and the moment deadbolt locks the door.
In an environment that the door closes slowly and the deadbolt jams before the
door is fully closed, the situation can be fixed by adjusting the door lock time.
Open the battery cover of the
inner body and briefly press the
[Register] button.
Door Lock Time Setup Function
DING
DONG
Press [51] ~ [59] button, and then press
[
] button.
Default: 1 second
[51] : 1 second
[59] : 9 second
Briefly press the [Register]
button on the inner body.
DING
DONG
[4] Button : Double authorization
mode on
[6] Button : Double authorization
mode off
Press the [
] button after pressing the
[4] or [6] button, and the authorization
mode will be set.
DING DONG
DENG
Two-factor Authentication Mode Operation
Touching
[Number Pad].
Enter the password
when the number pad is
lighted, and press the [
]
button.
Touch the card on to
the [Card Reader], if the
authentication is successful,
the door will open.
Success:
DING DONG DENG
Fail: DING DONG
DING DONG
Success:
DING DONG
DENG DONG
Fail: DING DONG
DING DONG
CARD
The sound that is generated when the number buttons are pressed, when the
door is locked or when the locked door is unlocked, can be set according to
the user’s preference. The product is set to generate all sounds at the factory.
- [ 0 ] Button: All sounds except the alarm sound are deactivated.
- [1] and [2] Buttons: All sounds are activated and the sounds get bigger as the step
become higher.
Sound Setting and Releasing
The Automatic Locking mode allows for automatic locking of the door
when it is closed.
- Automatic: The door is automatically locked 1 seconds after being closed.
- Manual: The door does not lock automatically, and [CLOSE] button must be
pressed from the inside, touch [Number Pad] to close the door.
Automatic/Manual Locking Setting
Open the battery
cover on the
inner body.
Put the [Sound Control]
switch on one of [0], [1], or
[2], and close the battery
cover.
~
Set the [Automatic/Manual
Locking] toggle switch of
the Inner Body to the ‘A’/‘M’
position.
Open the battery
cover on the inner
body.
~
Opening the Door Using an Emergency Battery
Inside: Press the [CLOSE] button, then the
sound for action-unavailable willbe
heard.
Outside: Press the [Number Pad] or touch with
a card, then the sound for action-
unavailable will be heard.
At-home security mode is to prevent opening of the door from outside while
someone is inside.
Security Assurance Mode Operation
While the door is locked, press
[CLOSE] button on the inner body
part for 3 seconds.
Security Assurance Mode
Activation
Security Assurance Mode Deactivation
Rapid beeping
DING DONG
DENG
Or
Security Assurance Mode Activation/Deactivation
DING DONG
DENG DONG
~
~
●
When the security assurance function is activated, the door cannot be
unlocked from the outside, so please be careful. Be especially careful not
to allow children to set this mode accidently from the inside.
Warning
This function generates an alarm sound and deactivates lock operation
when it is improperly handled from the outside.
This alarm will sound if an attempt is made to open the door with an invalid card, or if
a wrong password is entered five times in a row.
The alarm sound is generated, and the lock is deactivated for 3 minutes. While the
door is in this inactive mode, a single “DING” sound is generated every 10 seconds
and seven consecutive “DINGS” will sound after 3 minutes. Following this, the lock is
released from inactive mode.)
Press the [Register] button.
Outside
Apply the registered card or key tag to the card reader, or enter the
password and then press the [
] button.
Inside
Releasing the Alarm
Alarm Sound (Prank Prevention Function)
Set up Instructions for Alarm and Anti unlock functions
Alarm function
When this function is activated, an alarm sound and light will turn on for
approximately 5 minutes duration.
Anti-Bypass function
When this function is activated, the internal handle will become tightened to
prevent bypass attempts through door edge tools will be minimized.
When the door is closed, user can set
up the alarm function by pressing and
holding the [ ] button for 3 seconds
until sound confirmation.
Press [
] and hold.
After 3 seconds, the alarm will be
come active.
DING DONG DENG
Set up the Anti-Unlock function
Set up the Alarm function
CARD
Or
●
Anti-Bypass function should only be set up when there is no one inside.
DING DONG DENG
Release the Alarm function
Touch the keypad to turn on.
Present a registered RF tags/card or
password and press [
] to release.
~
BEEP BEEP BEEP ~
Release the Anti-Bypass function
Press the [CLOSE] button to release the
internal handle from Anti-Bypass function.
When this function is active, it may be
harder to pull the internal handle for elderly
or children to open the door from inside.
Warning
Password Change
The password can be 4~12 digits number. Only one password can be registered.
Enter the current password (‘1234’ after
initialization) when the number pad is lighted,
and press the [
] button.
DING DONG
1. Pressing the [Register] Button
(from the inside)
Open the battery cover of the inner
body and briefly press the [Register]
button.
2. Entering the Current Password
(from the outside)
DING DONG
DENG, DING
DING
Enter the new password (4 to 12 digits)
and press the [
] button.
3. Entering a New Password
(from the outside)
DING DING DENG
●
Manage your password with care so that unauthorized people will not
have access to it. Regularly changing your password can reduce the risk
of it being leaked.
Warning
To make sure the password has been
properly registered, check the new password
and close the door.
4. Checking New Password
Operation (from the outside)
DING DONG
DENG DONG
You can delete all registered cards.
Deleting Registered Cards
Enter the current password when the
number pad is lighted, and press [
] button.
DING DONG
DING DING
1. Pressing the [Register]
Button (from the inside)
Open the battery cover of the inner
body and briefly press the [Register]
button for 3 seconds.
2. Entering the Current Password
(from the outside)
DING DONG DENG
Pull the inner body handle
to open the door, and it will
deactivate.
If the number pad is lights, enter ‘88’ and
press [
] button.
3. Entering the number
(from the outside)
DING DONG DENG
