Samsung Electronics
4
Disassembly and Reassembly
No
Parts
Procedure
Remark
2
3
Tray Drain
Electrical Parts
(Main PCB)
7) Pull the lower left and right of discharge
softly for the outside cover to be pulled out.
8) In order to disassemble the Panel Front
press, in order, the left, center and right of
the upper side of the Panel Grille with the
plam of the hand to remove the hook.
And then disassemble the Panel Grille.
1) Pull Tray Drain out from the Back Body.
1) Take all the connector of PCB upper side
out. (Inclusion Power Cord)
2) Detach the outdoor unit connection wire
from the Terminal Block.
3) If pulling the main PCB up, it will be taken
out.
Tsar_DB98_15869A(1)_1 1/12/04 10:04 AM Page 4
Содержание SH05ZZ8
Страница 12: ...MEMO 11 Samsung Electronics...