Before you install the COMBO drive, we strongly recommend that you check that your setup meets the system
requirements listed below.
System Requirements
Item
Description
Computer
Intel Pentium II 400MHz/Celeron 466A(or higher), 128 MB of RAM (or higher) with
an 80pin IDE interface for Ultra DMA.
Free expansion unit
5.25 inch
Disk space
700 MB minimum
Windows version
Windows 98/2000/ME/XP (or higher)
(For Windows NT, we recommend Service Pack2, and Version is over 4.00.1381)
MS-DOS
5.0 or higher (For MS-DOS, The CD-R/CD-RW driver can only read a disc without
premaster Software.)
DVD Video playback
PC with Windows 98/2000/ME/XP DVD-Video playback software and appropriate
hardware (the Power DVD MPEG software is included in the COMBO drive
package)
DVD Region Protection Coding (RPC):
The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently,
the motionpicture industry has divided the worldinto different regions or zones thatcorrespond to the regional
markets intowhich the motion picture industry releasesmovies. Simply put, RPC codes are placedon movies
marketed throughout the world,based on the region of the world inwhich they are being sold. These
RPCcodes help control and prevent piratingof new movies into other motion pictureregions prior to their true
releasedates within those markets.
The TS-H492C(SH-M522C) COMBO drive supports RPCphase II. In the RPC-2 mode, the localcode can be
changed by users. RPC-2is selected by default for the TS-H492C(SH-M522C) COMBO drive.
You can change the region code up tofive times via an MPEG application.
Please contact your dealer or local SAMSUNG representative if you wish tochange the local code more than
fivetimes.
Using the Drive
