Samsung SGH-Z620 Скачать руководство пользователя страница 39

Страница: 39 / 86

SAMSUNG Proprietary-Contents may change without notice

Disassembly and Assembly instructions

6-2

This Document can not be used without Samsung's authorization

caution!

not flexure

1) Move FPCB to the open side of Hinge-

dummy.

2) Pull out the Hinge-dummy.

※

caution

1) Be careful not to tear or crack the FPCB of

LCD and CAMERA.

1) Rotate the LCD to anticlockwise and

extract two screw covers.

2) Unscrew them.

※

caution

1) Be careful not to damage or scratch the
molding.

1) Unsnap KEY FPCB CONNECTOR.
2) Disassemble a PBA from shield-can. And

do that from left side.

※

caution

1) Be careful not to crack the FPCB and

damage the connector.

2) Be careful not to damage BGA parts

1) Separate FOLDER assembly from FRONT
with pressing the FOLDER hinge.

※

caution

1) When separating, be careful not to bend
the FRONT.
2) Be careful not to tear or crack the FPCB of
LCD and CAMERA.
3) Be careful not to damage or scratch the
molding.

Содержание SGH-Z620























































































Результаты поиска

Содержание SGH-Z620

Отзывы:

Samsung SGH-Z620, Руководство по обслуживанию, Страница: 39 / 86

Результаты поиска

Содержание SGH-Z620

Отзывы: