
28
Menu functions
•
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
•
Move to phone: move the message from the SIM
card to the phone’s memory.
•
Move to SIM: move the message from the
phone’s memory to the SIM card.
•
Select objects: save images or sounds from the
message into your phone.
Write new
(Menu 1.3)
You can create and send a text message.
1. Enter your message.
You can enter up to 918 standard characters, or
approximately 402 Unicode characters, such as ‘â’.
2. Press <Options> to access the following options:
• Text formatting: change the text attributes.
• Add objects: add a sound, melody, picture, or
animation to the message.
• Add templates: retrieve a text template.
• Add from phonebook: add a Phone book
entry.
•
Add from bookmark: add a web page’s
address.
•
Language: change the language used in T9
input mode.
3. Press <Options> and select Save and send or
Send only.
4. If you select Save and send, select a memory
location.
5. Enter a destination number.
6. Press <OK> to send the message.
Templates
(Menu 1.4)
You can preset the templates to write a text message.
While viewing the templates list, press <Options> to
access the following options:
•
Edit: edit the template.
•
Send: send the template as an SMS message.
•
Delete: delete the template.
Me
nu func
ti
ons
Te
xt
m
es
sa
ge
s
(
M
enu
1)
29
Settings
(Menu 1.5)
Use this menu to customise the SMS settings.
• Setting x (where x is the setting group number):
each group has its own submenu.
Service centre: store or changes the number of
your message centre.
Default destination: store a default destination
number.
Default type: set the default message type.
Default validity: set the length of time your
messages are stored in the message centre while
the network attempts to deliver them.
Setting name: change the name of the setting
group.
• Common setting: The following options are
available.
Reply path: allow the recipient to reply to you
through your message centre.
Delivery reports: set the network to inform you
when your message has been delivered.
Bearer selection: select the GSM or GPRS
preferred bearer type.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Unicode if
you enter a Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half.
Delete all
(Menu 1.6)
Use this menu to delete all of the messages in each
message box.
1. Select a message type.
2. Press <Mark>to check the message box(es) to be
cleared.
3. Press <Delete>.
4. Press <Yes> twice to confirm the deletion.
Memory status
(Menu 1.7)
Use this menu to view the total number of messages
you can store and the number of messages you have
stored on the SIM card, in the phone’s memory, and in
the CB memory.
The setting options available in this menu may vary
depending on your service provider.