Entering Text
44
Using the T9 Mode
The T9 predictive text input mode allows you to
key in any character using single keystrokes.
This text input mode is based on a built-in
dictionary.
1. When you are in the T9 predictive text input
mode, start entering a word by pressing keys
to
. Press each key only once for one
letter.
Example: to enter
HELLO
in the T9 mode,
press
,
,
,
and
.
The word that you are typing appears in the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
the keystrokes.
3. If the word is correct, start entering the next
word.
Otherwise, press the
,
or
key
repeatedly to display alternate word choices for
the keys that you have pressed.
Example: both
OF
and
ME
have the sequence
,
. The phone displays the most
commonly used choice first.
4. Complete each word with a space by pressing
the
key.
• To type words not found in the T9 mode, change
the text input mode to the upper/lower-case
character input mode.
Entering Text
45
• To enter full stops, hyphens or apostrophes, press
the
key. The T9 mode applies grammar rules
to ensure that the correct punctuation is used.
Example:
is used twice to display two
punctuation marks:
• To change the case in the T9 mode, use the
key.
• You can move the cursor by using the and
keys. To delete letters, press the
key. Press
and hold down the
key to clear the display.
Using the Upper/Lower-Case
Character Mode
Use the
to
keys to enter your text.
1. Press the key labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note
: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move
right automatically, and then select the next
letter.
L
E
T
’
S
E
A
T
.
