SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
6-2
This Document can not be used without Samsung's authorization
...
1) Pull out the receiver and the motor
connector first. the LCD connector and the
key connector later.
1) Push out two red circled hooks slightly to
lift the PBA.
5
6
7
8
9
10
1) Insert tweezers between the bottom of the
motor and the frame to the direction that the
red arrow directs.
1) Take off the KEY FPCB with care not to
damage KEY FPCB.
1) Get rid of the screw in the A red circle.
You can lift the shield frame with pushing out
three hooks slightly.
1) Remove the sponge on the LCD connector
first, then you can detach the LCD from the
frame.