Settings
96
•
Bearer type
- set a data transmission
type
•
Access point name
- set the web
address for the access point
•
User name
- set a user name
•
Prompt password
- set to ask for a
password when you connect to the
access point
•
Password
- set a password for the
access point
•
Password authentication
- set an
authentication mode
•
Starting page
- set a homepage for
access points that connect to web
services
You can also define advanced settings for
Access points: press <
Options
>
→
Advanced settings
.
•
Network type
- set a network type
(IPv6 or IPv4)
•
Phone IP address
(IPv4 only) - set
the IP address of your device
•
Domain name servers
(IPv4) - set
primary and secondary domain name
server (DNS) addresses or set to
0.0.0.0 for automatic detection
•
Domain name servers
(IPv6) - set
primary and secondary domain name
server (DNS) addresses or set to
Automatic
(use automatic detection)
or
Well-known
(use well-known IPv6
addresses)
•
Proxy server address
- set the IP
address of the proxy server
•
Port Number
- set the port number of
the proxy server
Packet data
Control packet data connections when
using a GPRS network.
SGH-G810.book Page 96 Thursday, November 15, 2007 4:39 PM