SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-4
This Document can not be used without Samsung's authorization
1) Remove 6POINT SCREWS
1) Don't damage a structure carefully when
separating rear case.
1)When eleminting a KEY FPCB and a VOLUME
/ MOT FPCB, don't damage a FPCB carefully.
1) Don't damage a Slide FPCB carefully
while raising structure higher.
1) Don't damage a FPCB carefully
5-3. Disassembly and Assembly Instructions
5-3-1. Disassembly
1
2
3
4
5
6
1)Remove 6 screws
2) Push rear cover to
right a little and
Separating a rear case
when separating top
hook.
1) Untie side hooks
using JIG separator.
( same left, right)
1)Eleminating a
connector of top
TAPE
2) Eliminating a
PBA SCREW
1) Extract KEY FPCB/
VOL/MOT to right..
1)
Eleminte
SCREW 4POINT of SLIDE HINGE
PLATE
2) Untie hooks raising top of FRONT.
1) After folding FPCB CON, extract
to ass'y hole of Front.
1) Raise a PBA and Eliminate a
SLIDE FPCB
