SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-12
This Document can not be used without Samsung's authorization
5
8
7
6
1. Set up Antenna at FRONT(including RF CABLE).
2. Set a PBA.
3. Rmove dust using AIR GUN and then connect
KEY, LCD CONNECTOR.
4. Connect RF CONNECTOR.
5. Attach FRONT LABEL.
※
caution
1. Beware that you do not damage F-PCB.
2. Be caredful that you do not make scratch when
you assemble a Hinge.
3. Check folder Tention and F-PBC connected
with accuracy.
4. Chack RF CABLEconnected with accuracy.
※
caution
1. Be caredful that you do not damage SIDE F-
PCB when assembling a REAR.(A F-PCB can
be interfered with SIDE KEY of REAR)
2. Press Antenna part horizontally.
3. Check GAP is exist after finish assembly.
1. Insert F-PCB to hole of FRONT.
2. Assemble while pressing the hinge.
3. Open and close a folder 2~3 times to Check
there is a problem or not.
※
caution
1. Beware that you do not damage F-PCB when
you insert F-PCB to hole of FRONT
2. Check KEY F-PCB GUIDE HOLE is in
conformity with FRONT.
1. Slip on CHANGEABLE COVER.
※
caution
1.After sliping on CHANGEABLE COVER, check a
gap exist or not.
Assemble during
pressing a hinge.
After seting up
Antenna, arrange
RF CABLE
Watch out when
you connect RF
CONNECTOR.
Connect KEY, LCD
CONNECTOR
<Assemble REAR from
upside>
<Assemble Antenna
Part>
<Assemble both sides
Hook of REAR >
DONE
Drive SCREW : 6
POINT (M1.4*L4)