
1 Switch the phone on by pressing
for at least two seconds.
Result:
◆
The phone gives a
long beep
◆
The greeting message
is displayed
◆
The phone scans for
your home network;
when the network name
and
M E N U
a r e
displayed, you can
place and receive calls
➢
◆
If
P h o n e L o c k
is displa-
yed, enter the unlock code
first (see page 55).
◆
When you switch the tele-
phone on for the first time,
E n t e r P I N :
is displayed
(see page 20).
◆
If
C h e c k C a r d
is displayed,
check that your SIM card is
correctly installed (see
page 15).
2 When you have finished using the
phone, switch it off by pressing
again for two seconds.
Result:
◆
The phone gives a
long beep
◆
P o w e r O f f
appears
◆
The display is cleared
◆
The battery is no
longer being used
➢
To enable the phone to switch
o ff and lock automatically
(option), see page 58.
Switching the Phone On and Off
A mobile phone can only place and receive calls
when it is switched on.
19
1 Plug the travel adapter into the
bottom of the handset.
2 Plug the travel adapter into an
appropriate wall socket.
Result:
◆
Charging begins
◆
The battery status
indicator blinks
➢
You can use the phone while
charging the battery pack.
However, the charge time
will be longer.
3 When
is displayed (charging
is finished), unplug the adapter
from the wall socket.
Refer to the table below when
checking the battery status.
Indication
Battery Status
Discharged
1/3 full
2/3 full
Fully charged
4 Unplug the adapter from the
phone by:
◆
Pressing the two buttons on
the sides of the adapter plug
◆
Pulling the plug
Charging a Battery Pack
You are supplied with a battery charger that must
be plugged into an appropriate wall socket
(230V~50Hz). For more details about charging
times, see page 16.
➢
◆
The battery pack may become warm during
charging. See pages 12 and 13 for various safety
precautions to be taken with the battery pack.
◆
When the battery is discharged,
and
L o w
B a t t e r y
are displayed. Refer to the table in
Step
3
.
18
1
4
1
2
P o w e r O f f
2
M E N U