Samsung SDM-090P, Руководство пользователя

Страница: 54 / 69

2. TIME LAPSE record mode
- When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “TLV”.
- The image signal entered from the maximum 9 cameras is recorded on the
VCR in response to the trigger signal of VCR.
- The recorded output records the only channel that the “REC DUTY” of the
“1.REC OUT SET” is set to more than 1.
- The trigger out of VCR and the VTR terminal this unit must be connected.
- “NO TRIGGER” character is displayed on screen while operating the field
record operation of the normal mode if the trigger signal is not received for 10
seconds.
3.Weight value (REC DUTY) record
- Used to record weight value (record frequency is more than the channel
whose duty is low) for the important channel.
- Perform the weight value record using the REC duty (OFF, 1~5) by channel
set from the “REC DUTY” of the “1.REC OUT SET” on the main menu.
- The channel whose duty is set to “OFF” is not recorded.
- Example)
CH1:1, CH2:2, CH3:1, CH4:3, CH5:OFF, CH6:1, CH7:1,
CH8:1, CH9:1...
6-2
Digital Multiplexer
SDM-090(P)
T
1 VCR TAPE 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
1
T T T T T T T T T T T T T T T T T T T
1 2 2 3 4 4 4 6 7 8 9
1 2 2
3 4 4 4 6
Trigger output from TIME LAPSE VCR
SDM-090(P)D 6/26/01 5:45 PM Page 6-2