Samsung SDM-090 Скачать руководство пользователя страница 4

Страница: 4 / 69

Digital Multiplexer

SDM-090(P)

IMPORTANT SAFEGUARDS

Read instructions: All the safety and operating instructions should be read

before the appliance is operated.

Retain instructions: The safety and operating instructions should be retained

for future reference.

Heed warnings: All warnings on the appliance and in the operating instructions

should be adhered to.

Follow instructions: All operating and use instructions should be followed.

Cleaning: Unplug this video product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Attachments: Do not use attachments not recommended

by the video product manufacturer as they may cause hazards.

Water and moisture: Do not use this video product near

water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a

wet basement, or near a swimming pool, and the like.

Accessories : Do not place this video product on an unstable cart, stand, tripod,

bracket, or table.

The video product may fall, causing serious injury

to a child or adult, and serious damage to the

appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the

manufacturer, or sold with the video product.

Any mounting of the appliance should follow the

manufacturer's instructions and should use a

mounting accessory recommended by the manufacturer.

SDM-090(P)A 6/26/01 5:46 PM Page iv

Содержание SDM-090






































































Результаты поиска

Содержание SDM-090

Отзывы:

Бренды по названию

Популярные бренды

Samsung SDM-090, Руководство пользователя

Результаты поиска

Содержание SDM-090

Отзывы:

Бренды по названию

Популярные бренды