Samsung SDE-120N Скачать руководство пользователя страница 42

Страница: 42 / 94

42_

DVR setup

DVR Connection

Use the direction buttons to move to the upper <

NETWORK

> icon in the SYSTEM SETUP menu screen

and press the [

ENTER

] button.

The IP SETUP screen appears.

Deselect the <

DHCP

> checkbox.

Locate the local PC in connection with the same router and check information of gateway, subnet mask
1st DNS and 2nd DNS server.

Provide the IP address, gateway, subnet mask 1st DNS, 2nd DNS server as appropriate.

If the DHCP server has the start address (192.168.0.100) and the end one (192.168.0.200) specified, change each of
them to one between “192.168.0.2~ 192.168.0.99” and “192.168.0.201 ~ 192.168.0.254”.

Router Port Forwarding

To access the PC or DVR in the local LAN area of the router, set the port forwarding for the router.
The DVR will use <

RTSP SERVICE PORT

> and <

WEB SERVER PORT

> for this purpose. You must set the

port forwarding for both ports.

For more information, refer to “

Network Setup Guide

” that comes with the DVR.

To check the connection status

Provide the IP address for the local PC or remote PC.

When the login dialog appears and prompts you to enter the ID and password, this means you have set
the connection properly.

EVENT / SENSOR

You can configure the settings of HDD EVENT, ALARM INPUT, ALARM OUTPUT and BUZZER OUTPUT.
See the previous section to repeat steps 1~3. (Page 25)

HDD EVENT

You can set to sound the alarm if the HDD has a problem or is full.

Using the mouse may help easy setup.

Use the direction buttons to move to the upper <

EVENT /

SENSOR

> icon and press the [

ENTER

] button.

The HDD EVENT screen appears.



EVENT / SENSOR

Lo-Call 1890 866 900

www.cctvireland.ie

Содержание SDE-120N































































































Результаты поиска

Содержание SDE-120N

Отзывы:

Похожие инструкции для SDE-120N

Бренды по названию

Популярные бренды

Samsung SDE-120N, Руководство пользователя

Результаты поиска

Содержание SDE-120N

Отзывы:

Похожие инструкции для SDE-120N

Бренды по названию

Популярные бренды