COLOR CCD CAMERA
User Guide
14
COLOR CCD CAMERA
User Guide
15
Installation
CH1
CH2
CH3
CH4
300m or Less
1.0Km or Less
SCC-3100A
SDC-435U
RS-485
SUP-400
SUR-400
VIDEO
UTP CABLE
BNC CABLE
RS-485
UTP Junction Box Link Setup
• Using the product with third-party UTP peripherals may result in degradation of product
function and performance.
• Attenuation and distortion in signal may occur if the maximum transmission distance is
exceeded. Please note that depending on the installation environment/condition, the
signal may become attenuated and distorted and cause the camera to function
incorrectly even when the transmission distance is within the maximum.
• If using RS-485 communication, please use the STW(SPD), Pelco-P, Pelco-D, Vicon,
Panasonic, Bosch, Honeywell and SEC Protocol.
• If you are using the 1Ch Passive Receiver system setup, please connect the power
supply directly to the camera.
• Don't simultaneously connect both BNC CABLE and UTP CABLE with camera.
Notes
If the distance between the camera and the Junction Box exceeds
300m, please connect an AC 24V or DC 12V power supply to the
Power Input Terminal Block(Accessory). Impressing power when
the maximum transmission distance is exceeded may result in
degradation of picture quality or even camera failure.
1. SDC-435U
→
4Ch Junction Box
→
4Ch Receiver
→
DVR/Monitor/Controller
The maximum power transmission distance for the camera is 300m, and the distance
between the camera and the 4ch Receiver cannot exceed 1.0km.
2. UTP Receiver Link Setup(Additional Power input is needed)
SDC-435U
→
1Ch Passive Receiver
→
DVR
→
Monitor
1Ch Passive Receiver
300m or Less
System Diagram
