COLOR CCD CAMERA
COLOR CCD CAMERA
User’s Manual
User’s Manual
11
10
Installation Procedures
Overview
Installation Procedures
Rear View
When Using Auto Iris Lens
When using a C-Mount lens
*High Voltage Type
Power lamp
: Lights up when the correct power is supplied to the camera.
Function Setup Button
SETUP button : Displays the menu on the screen and uses enter sub menu.
Up&Down button : Used to move the cursor up or down in the menu screen.
Left&Right button : Used to move the cursor left or right in the menu screen
Video output terminal
:
Sends video signal and connects to the video input terminal of the monitor.
Power input terminal
: Connects to the power appropriate to each model.
LENS
The lens is not supplied with this camera. Purchase a lens suitable for your environment.
This camera accepts the auto iris lens and both C-and CS-mount lens.
• It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major
functions of this camera.
• Keep the lens surface clean, since if it is contaminated with dirt or fingerprints the
picture quality suffers.
Notes
1. Strip the insulation of the auto iris lens
cable 8mm from the end.
2. Strip the insulation of the core of the auto
iris lens cable to expose a 2mm length.
approx. 8mm
approx. 2mm
3. Remove the cover of the auto iris lens connector plug and solder the lens cable to the
connector pin of the plug.
No.3 Pin
No.1 Pin
Connector
Lens cable
No.4 Pin
No.2 Pin
LENS
Pin No.
DC
VIDEO
No.1 Pin
Damping -
Red (power)
No.2 Pin
D
NC
No.3 Pin
Drive +
White (video signal)
No.4 Pin
Drive -
Black (GND)
4. Please replace the auto iris lens connection plug cover and take off the CCD protection
cap, and then attach the auto iris lens to the camera
by screwing it in clockwise.
5. Please insert the connection plug that is connected to
the auto iris lens cable into the auto lens connector,
which is located on the side of the camera.
Please take off the CCD protection cap and attach the C-Mount lens to
the camera by screwing it in clockwise.
C-mount adaptor
