COLOR CCD CAMERA
COLOR CCD CAMERA
User’s Manual
User’s Manual
28
29
If there are problems in operation, please refer to the items below. If the problem
persists, please contact the agent you purchased this product from.
Troubleshooting
Problems
Troubleshooting
Nothing appears on the
screen.
• Please check the power connection.
• Please check the video signal line connection.
• Please check and make sure that the auto lens switch
is set to DC (VIDEO) when using a DC (VIDEO) lens.
• Please check the Brightness of Auto Iris lens.
The video image is not clear.
• Please check if the lens is clean.
Please clean the lens with a clean cloth or brush.
• Please adjust the contrast feature of the monitor.
• Please make sure that the screen is not exposed
directly to a bright light.
Please move the camera if necessary.
• Please readjust the back focus of the camera.
The screen is dark.
• Please adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/ Hi-z
properly, and check the terminals. (refer to page 12)
• Please check if an auto iris lens is being used and
adjust the brightness level.
There is a problem with the
camera operation. The
camera surface is too hot and
black stripes appear on the
screen.
• Please check if an appropriate power source to the
camera complies with the manufacturer's standard
requirement, or if the voltage keeps changing.
Problems
Troubleshooting
The MOTION DETECTION
function is not working.
• Please check if 'MOTION DETECTION' mode is turned
on.
• Please check if the MD LEVEL is too low.
• Please check the setting of the MD AREA.
Colors are not quite right.
• Please check the 'WHITE BAL' setting. (Please refer to
page 17)
The screen is flickering.
• Please check if the camera is facing directly into
sunlight or fluorescent light.
• Please check if an auto iris lens is being used.
• Please check the connection of the lens connector
cable.
L/L mode isn't able to be
selected.
• Have you connected your camera to DC power source?
Connect it to AC power source.
L/L mode is not available.
• Please check the frequency of power supply (60Hz for
NTSC, 50Hz for PAL).
COLOR (DAY & NIGHT) mode
is not working.
• Please check if the AGC menu is set to the OFF
position.
SENS-UP function is not
working.
• Please check if the AGC menu is set to the OFF
position.
• Please check if the SHUTTER menu is set to MANUAL
mode.
• Please check the limit of Sens-UP AUTO mode.
