14_
troubleshooting
troubleshooting
proBLem
SoLUTIoN
motor downs and does
not start.
•
Check cable, plug and socket.
•
Leave to cool.
Suction force is gradually
decreasing.
•
Check for blockage and remove.
cord does not rewind
fully.
•
Pull the cord out 2~3m and push down the cord rewind button.
Vacuum cleaner downs,
does not pick up dirt
•
Check hose and replace if required.
Water leakage from the
dust bin.
•
Check rubber packing inserted tightly at the upper part.
•
Check rubber packing to the lever at the bottom of the dust
bin.
excessive water drops
from the inside of the
body.
•
Some droplets on the inside body are to be expected.
Please dry the aqua cyclone fully.
dirty water comes out
of the top of the main
body
•
Check the filter is located properly.
•
If the amount of water becomes excessive, check if water
inside dust bin is over the max line and make the water level is
under the max line.
Water comes out from
the back cover.
•
Check the water level of the aqua cyclone.
•
Please operate the vacuum cleaner without the aqua cyclone
until water does not come out from the back cover.
Low or decreasing
suction.
•
Please check filters. If required clean it as illustrated in the
instruction. If filters are out of conditions, change them to new
one.
Body overheating
•
Please check filters. If required clean it as illustrated in the
instruction.
Static electricity
discharge
•
Please decrease power suction.
Unpleasant smell during
vacuuming
•
Please note that there may be a slight smell during vacuuming
when the cleaner is new (4-5 days).
This vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low voltage Directive : 2006/95/EC
DJ68-00523G.indb 14
2010.10.13 3:42:18 PM
Содержание SD9480
Страница 16: ...DJ68 00523G indb 16 2010 10 13 3 41 34 PM ...
Страница 31: ...memo DJ68 00523G indb 15 2010 10 13 3 42 18 PM ...
