English
_25
the focus manually, that will operate the same as in <
MF
>. This will also restore
focus after the operation of zoom.
- ONEAF : Restores focus after the operation
of zoom, and operates the same as in <
MF
>
unless the operation of zoom is executed.
- MF : You can adjust the focus manually.
While you are working on the following
objects, <
AF
> may not work properly.
If this is the case, use <
MF
> instead.
- Very bright object, or dominant object in
a dark scene
- Object against the rear side of a moist or dirty glass
- A scene where nearby and distant objects co-exist
- White wall or single-colored object
- Venetian blinds and other horizontally striped objects
ZOOM SPEED
You can adjust the zoom operation speed.
DISPLAY ZOOM
You can set to display the zoom status on the screen.
It will disappear in about 3 seconds if the zoom factor has no further change.
DIGITAL ZOOM
You can set the maximum allowable digital zoom ratio.
Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of
x25. If you set DIGITAL ZOOM to x16, you can take a shot at up to x400 (25x16).
When you set DISPLAY ZOOM as on, you may see zoom value on the screen.
DETAIL
Used to adjust the vertical and horizontal distinction, respectively.
V-SYNC
You can set the V-SYNC mode.
- If you select <
INT
>, the camera will use the internal synchronization.
M
DAY/NIGHT
AUTO
DAY/NIGHT AUTO
WHITE BAL
WHITE BAL
FOCUS MODE
ONEAF
ZOOM SPEED
ZOOM SPEED
[2]
[2]
DISPLAY ZOOM
OFF
DISPLAY ZOOM
OFF
DIGITAL ZOOM
X16
DIGITAL ZOOM
X16
DETAIL
[2]
DETAIL [2]
V-SYNC
INT
V-SYNC INT
AGC COLOR SUP
MID
AGC COLOR SUP
MID
4225 NTSC ENGLISH.indd 25
4225 NTSC ENGLISH.indd 25
2010-3-17 15:10:57
2010-3-17 15:10:57
AF
SENSITIVITY
[5]
NIGHT
MID
