Samsung SCX-4200/XAZ Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 150

background image

Samsung Electronics

Service Manual

System Overview

3-28

3.3.13 Checking Paper jam

Paper Jam happens when a paper is not fed to required position by a mechanical obstacle.

The paper jam is decided by checking the states of sensors while moving the paper. There are a feed sensor and
an exit sensor in the paper-feeding path.

The jam is classified to 3 types according to the position of the paper.

3.3.13.1 Paper Jam 0

This is the status that the paper doesn’t arrive in the feed sensor. If the feed sensor is not activated within the speci-
fied time after re-picking up the paper, the engine decides that the paper is jammed or used up. So the engine
informs the error status of the main system and the error message is displayed at LCD window informing the error
status of the user. The specified time will be decided based on a mechanical design length. When Paper Jam0 hap-
pens, fuser and fan is off. The control of fuser and fan may be changed.

3.3.13.2 Paper Jam1

This is the status that the paper is jammed between the feed sensor and the exit sensor. If the feed sensor is active

or the exit sensor is not active after the specified time from activating the feed sensor, the engine decides the paper
is jammed. Also, if the status (the exit sensor and the feed sensor are active) is maintained, the engine decides the
paper is jammed by the structure of the mechanism after the specified time. So the engine informs the error status
of the main system and the error message is displayed at LCD window informing the error status of the user. The
specified time or steps will be decided based on the mechanical design length and the paper size. When Paper
Jam1 happens, fuser and fan is off.

3.3.13.3 Paper Jam2

This is the status that the paper is jammed after it passes the exit sensor. If the exit sensor is still active after the

specified time from activating exit sensor, the engine decides the paper is jammed. So the engine informs the error
status of the main system and then the error message is displayed at LCD window informing the error status of the
user. The specified time or steps will be decided based on the mechanical design length and the paper size. . When
Paper Jam2 happens, fuser and fan is off.

3.3.14 Out Bin Tray Full

N/A

«
...
41
42
43
44
45
...
»

Содержание SCX-4200/XAZ























































































































































Отзывы:

Нет отзывов

Похожие инструкции для SCX-4200/XAZ

Pixma MG2400 Series

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 358

Бренд: Panasonic Страницы: 155

Бренд: Panasonic Страницы: 160

Бренд: Wasp Страницы: 2

Бренд: Xerox Страницы: 418

Бренд: Konica Minolta Страницы: 32

Бренд: HPRT Страницы: 2

AccurioPrint 2100

Бренд: Konica Minolta Страницы: 32

Бренд: Olivetti Страницы: 74

Бренд: Lanier Страницы: 234

Бренд: Printek Страницы: 34

Бренд: Konica Minolta Страницы: 15

Бренд: Rokit Страницы: 50

Бренд: M&R Страницы: 36

Бренд: SEWOO Страницы: 8

Бренд: Gestetner Страницы: 4

Бренд: Xerox Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды