background image

20_ Setup

Setup

EXPOSURE

EXPOSURE SETUP

 

 1.BRIGHTNESS 

  

2.SHUTTER 

  

4.SENS-UP

10

IIIIIIIII

*

IIIIIIII  

  

3.AGC 

HIGH

  

5.RETURN

AUTO

 

---

1.

When the SETUP menu screen is displayed, select EXPOSURE by using the Function 
Setup switch so that the arrow indicates 'EXPOSURE'.

Select a desired mode using the Function 
Setup switch.

2.

--- :

-

Shutter speed is fixed.

defOG

 

Through the defogging function, camera can automatically recognize fog concentration of the image, defog, 

         self correct in hazy, rainy, flue gas and other inclement weather to get a clear image.

1. 

When the SETUP menu screen is displayed, select ‘DEFOG’ by using the Function Setup switch.

2. 

Select a desired mode.

 

AUTO : 

 

(low, middle, high).

 

OFF: Turn off Defogging function.

The camera will automatically correct image

 according to the defogging level (low, middle,

 high) set by the user. 

Manual : The camera will adjust the definition of the

 image according to user's preferences 

through the defogging level

.

Defogging and SSDR function cannot be run simultaneously.  When defogging function is set

 to AUTO    or MANUAL mode,  SSDR function is not available. When SSDR functions is turned 

on, defogging would  become inactive

DEFOG SETUP

 

 

1.LEVEL 

 

MIDDLE

   2.RETURN

MANUAL :

  You can control shutter speed manually.

-

You can select the shutter.

BRIGHTNESS : Adjusts the video brightness.

SHUTTER :

A.FLK :

     

-

Select this when you experience 

picture fl icker, which can happen 
when there is a clash with the 
frequency of the installed lighting.

( NTSC MODEL : 1/60~1/120,000 , PAL MODEL : 1/50~1/120,000)

(x2 x512)

~

x4

     

AGC (AUTO GAIN CONTROL) (OFF/ LOW/ MIIDDLE/ HIGH) :

The higher gain level, 

the brighter screen  but the higher noise.

SENS-UP : When it is night or dark,the camera 

automatically detects the light level and

 maintains a clear picture if this model is

 activated.

- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.

 

RETURN

 Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.

 

When the AGC is set to OFF, SENS-UP will be disabled.

 

 

LIMIT

AUTO

Press SET to Return

When the SENS-UP is set to OFF, the SHUTTER optional mode is A.FLK,MANUAL or ---.

Содержание SCO-2081R Series





































Отзывы: