32
Section 5: Voice Service
VoiceSignal is state-of-the-art voice recognition software for your mobile
phone that lets you dial numbers, lookup contact information, and open
applications using your voice. To access your phone’s voice settings, do
the following:
In standby mode, press
Menu
➔
Tools
➔
Voice SVC
➔
Voice
Commands
.
– or –
In standby mode, press and hold
.
“
Say a Command
” appears in the display and is pronounced through the
earpiece, followed by a list of available commands.
Note:
Speaking clearly, say the command that you want to use. If, after a
few seconds, the device does not recognized a command, it prompts
you to repeat the command.
If, after a few more seconds, it still does not recognize a command, it
tells you “
Sorry, no match found
,” and cancels voice recognition.
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and voice-
activates all the names stored there. When you have add or change
contacts, VoiceSignal automatically reloads and voice-activates the entire
list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call before
you can use VoiceSignal again.
