Call functions
22
Prepend dialing
The prepend option lets you add digits, such as
area codes and network feature activation codes,
to a phone number that is in your call logs or
Contacts.
Speed dialing
Once you have stored phone numbers in the
Contacts memory, you can dial them easily with a
few presses of the keys.
Note: When several numbers are saved in one name
entry, the first number you entered is
automatically specified as a speed dial
number. To change the speed dial number, use
Speed dial of the Contacts options; see
page 40.
Four-digit dialing
You can quickly dial a phone number in Contacts
by entering its last four consecutive digits. This
feature is convenient if you have the number
memorized, but you have forgotten where the
number is stored in your Contacts.
1. Enter the last four digits of the phone number
you want to dial.
2. Press the Menu soft key and select the 4-digit
dial option. The phone displays the phone
number matching the four digits.
3. Press the SEND key to dial the number.
Call functions
23
Pause dialing
When you call an automated system, like a
banking service, you are often required to enter a
password or account number. Instead of manually
entering the numbers each time, you can store
the numbers in your Contacts, separated by
pauses.
There are two kinds of pauses that can be entered
on your phone:
• Hard pause: A hard pause stops the dialing
sequence until you press the SEND key.
• 2sec pause: A two second pause stops the
dialing sequence for two seconds and then
automatically sends the remaining digits.
Storing pauses in a Contacts entry
To store a number in your Contacts that contains
pauses:
1. Enter the phone number you want to store,
such as the bank’s teleservice phone number.
2. Press the Menu soft key to access the options.
3. Select the required pause type and press the
OK key.
• Press the 4 key for Hard Pause. The letter
“P” displays, meaning that a hard pause will
occur at that point in the dialing sequence.
• Press the 6 key for 2sec Pause. The letter
“T” displays, meaning that a “Timed” pause
will occur at that point in the dialing
sequence.