111
S
Se
ettu
up
p
110
S
Se
ettu
up
p
Restrict
This feature allows you to restrict outgoing calls
from your phone except emergency calls by the
hard-coded emergency numbers (911, *911 and #911)
or three programmed emergency numbers (
Menu 9-
9-4
). Once you restricted the phone, storing a number
is also unavailable.
Select
Yes
to turn this feature on or
No
turn it off.
Lock Code
This feature allows you to change your current lock
code to a new one. The lock code is preset to 0000
at factory.
Enter a new, four-digit lock code and enter the code
once again at a prompt.
Note
: Your phone does not allow viewing of the lock
code for security reason. So, if you have changed
the lock code, be sure to write down or memorize it.
Emergency Number
Your phone provides the option of storing three
emergency numbers. All these numbers can be
manually dialed at any time even when your phone is
locked.
IMPORTANT NOTICE!
Because of various transmission methods, network
parameters and user settings used to complete a call
from your wireless phone, a connection cannot
always be guaranteed. Therefore, emergency calling
may not be available on all wireless networks at all
times.
DO NOT depend on this phone as a primary method
of dialing 911 or for any other essential or
emergency communications.
Remember to always turn your phone on and check
the adequate signal strength before placing a call.
To store a emergency number:
1. Press or to find the desired location
and press .
2. Enter the desired number and press to save
the number.
Each emergency number can be up to 10 digits
long. The number already stored in the selected
location is automatically deleted when you enter a
new number.
To make an emergency call in Lock mode, simply
enter a programmed number, then press
.
