54
55
STO
MENU
RCL
SAVE
4
5
6
1
2
3
7
8
0
9
GHI
JKL
MNO
.QZ
ABC
DEF
PRS
TUV
OPR
WXY
PWR
STO
MENU
RCL
SAVE
4
5
6
1
2
3
7
8
0
9
GHI
JKL
MNO
.QZ
ABC
DEF
PRS
TUV
OPR
WXY
PWR
4. Press
or
to choose the status
you want.
5. Press
STO
.
4
5
4
Automatic Receiving
: If this feature is activated (
YES
mode)
and a call is received, the phone will answer the call
automatically after 2 rings. If it is disabled (
NO
mode), you must
press any button except
PWR
to answer the call.
If you have chosen LAMP or VIBRATOR (option) mode to
alert the incoming call, the Automatic Receiving feature will
not activate.
Selectable Features
Automatic Redial
: When this feature is activated (
YES
mode), a number is automatically redialed if the call is not
connected successfully. If the phone is connected to the system
while redialing the number, you can hear the connect tone. If it
is disabled (
NO
mode), you must redial manually.
Tone Length
: You can change the tone length. Your phone is
preset to
Short
at the factory. If the remote phone does not
access the tone generated from your phone, change the tone
length to
Long
.
When you call a paging system, your phone should be in
Short
mode.
Backlight:
When you turn on your phone, the LCD display and
keypad light up. You can choose from
Automatic
,
Always
ON
, or
Always OFF
. In
Automatic
mode, the light goes
off automatically 8 seconds after the last button is pressed. In
Always ON
mode, if you use the phone with hands-free kit,
this light is always on; if not, this mode operates the same as
Automatic
mode. If you choose
Always OFF
mode, the
light is always off.
Call Time Display
: If this feature is activated (
ON
mode), the
call time counter is automatically displayed when the phone is
connected to the system. You can check the call time during
telephone conversation. In
OFF
mode, you must activate the
call time display manually by pressing
MENU
and numeric
button
1
while you are over the phone. To turn off the feature,
press
MENU
and
1
again.
The call charge starts to count when the call is actually
connected.
Present Time Display
: If this feature is activated (
ON
mode),
the current time is displayed. In
OFF
mode, the current time is
not displayed.
Send PIN
: You can choose
Never
or
Prompt
after you enter
the lock code.
PIN (Personal Identification Number): Your service provider
may require you to enter PIN to place a call. Consult it with
your service provider.
Advanced
Features
Advanced
Features