background image

ENGLISH

46

46

Advanced Recording

DSE(Digital Special Effects) SELECT

The DSE function works in CAMERA mode only.

The digital effects enable you to give a creative look to your recording by adding various special effects.

Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create.

There are 9 DSE modes.

a. ART mode

This mode gives the images a coarse effect.

b. MOSAIC mode

This mode gives the images a mosaic effect.

c. SEPIA mode

This mode gives the images a reddish-brown pigment.

d. NEGA mode 

This mode reverses the colors of the images, creating a negative image.

e. MIRROR mode

This mode cuts the picture in half, using a mirror effect.

f. BLK & WHT mode

This mode changes the images to black and white.

g. EMBOSS mode

This mode creates a 3D effect (embossing).

h. CINEMA mode

This mode covers the upper/lower portions of the screen to give a cinematic effect.

i. MAKE - UP mode

This mode allows the images to be selected in red, green, blue or yellow colors.

b

d

c

e

f

h

g

i

a

00511B SCD80-SEA (28~58)  2/12/03 11:55 AM  Page 46

Содержание SCD80
























































































Отзывы: