Samsung SCD180, Руководство по обслуживанию

Страница: 14 / 145

Samsung Electronics 4-1
4. Alignment and Adjustment
4-1-1. VCR Adjustment Preparation
1. How to get into the VCR adjust mode.
STEP 1
1. Connect the power source.
2. Set the mode switch of the video camera to
"VCR" position.
3. Push the “TAPE EJECT” switch so that Door
Housing is opened.
STEP 2
1. Press and hold the "F.ADV" button on the
remote control and "DISPLAY" button on the
video camera at the same time for more than 5
seconds.
2. When monitor OSD appears as shown below,
VCR adjustment mode has been activated suc-
cessfully.
3. When changing the adjustment item, please
press the “PHOTO/Self Timer” button on the
Remote controller.
4. You can press “T/W” button on the remote con-
troller to change adjustment value.
5. After setting adjustment value, please press
“START/STOP” button on the remote controller
to confirm DATA.
VCR ADJ 01
EPR:FF EVR:FF
SP
–:– –:– –:– –
Indicates current adjustment item.
Indicates the adjusted values
Indicates preset values
4-1. VCR Adjustment