Samsung SCD-2022R, Руководство пользователя

Страница: 20 / 36

Setup
20_ Setup

defOG
Through the defogging function, camera can automatically recognize fog concentration of the image, defog,
self correct in hazy, rainy, flue gas and other inclement weather to get a clear image.
1.
When the SETUP menu screen is displayed, select ‘DEFOG’ by using the Function Setup switch.
2.
Select a desired mode.

AUTO :

(low, middle, high).

OFF: Turn off Defogging function.
The camera will automatically correct image
according to the defogging level (low, middle,
high) set by the user.
Manual : The camera will adjust the definition of the
image according to user's preferences
through the defogging level
.
Defogging and SSDR function cannot be run simultaneously. When defogging function is set
to AUTO or MANUAL mode, SSDR function is not available. When SSDR functions is turned
on, defogging would become inactive
WHite bal(WHite balaNCe)
Use the White Balance function to adjust the screen color.
1.
2.
Select a desired mode using the Function Setup switch.
※
Select one of the following 5 modes, as appropriate for your purpose.

ATW :
When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch
so that the arrow indicates ‘White Bal’.

OUTdOOR

INdOOR : Select this when the color temperature is between 4,500°K and 8,500°K.

MaNUal : Select this to fine-tune White Balance
manually. Set White Balance first by using the ATW
or AWC mode. After that switch to MANUAL mode,
fine-tune the White Balance and then press the
Function Setup switch.
WB MANUAL
 RED GAIN
IIIIII
*
IIIIIIIIIIIIIIIIIIII
BLUE GAIN
IIIIIIIIIIIIIIIII
*
IIIIIIIIII
Press SET to Return

aWC
→
Set : To find the optimal luminance
level for the current environment, point the camera
towards a sheet of white paper and press the Function Setup switch. If the environment
changes, readjust it.
DEFOG SETUP
 1.LEVEL MIDDLE
2.RETURN
↑
SET mode.
When the color temperature of the environment surrounding the subject is out of the control range
When the ambient illumination of the subject is dim.
3 If the camera is directed towards a fluorescent light or is installed in a place where illumination

White Balance may not work properly under the following conditions. In this case, select
AWC
1
2
Select this when the color temperature is between 1,800°K and 10,500°K.
: Select this when the color temperature is between 1,800°K and
10,500°K.(sodium light inclusion)
117
193