Samsung SCD-2020, Руководство пользователя

Страница: 11 / 19

COLOR DOME CAMERA User Guide
20
COLOR DOME CAMERA User Guide
21
Operating Your Camera
MAIN SETUP
1.LENS SHADE ON
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
• White Balance may not work properly under the following conditions. In this case select
the AWC mode.
❶ …………
When the color temperature of the environment surrounding the subject is out of the
control range (e.g. clear sky or sunset).
2
…
When the ambient illumination of the subject is dim.
3 ……
If the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become unstable.
Notes
MANUAL : Select this to fine-tune White Balance
manually. Set White Balance first by using
the ATW or AWC mode. After that switch
to MANUAL mode, fine-tune the White
Balance and the Function Setup switch.
AWC
→
SET : To find the optimal luminance level for
the current environment, point the
camera towards a sheet of white paper
and press the Function Setup switch. If
the environment changes, readjust it.
SSDR (Samsung Super Dynamic Range)
SSDR illuminates darker areas of an image while retaining the same light level for brighter
areas to even out the overall brightness of images with high contrast between bright and
dark areas.
SSDR OFF
1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the Function Setup
switch so that the arrow indicates ‘SSDR’.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
SSDR ON
This camera is designed so that it delivers a distinctive subject and background at the
same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary W-IV DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function
Setup switch so that the arrow indicates BACKLIGHT .
BACKLIGHT
MAIN SETUP
1.LENS SHADE ON
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR OFF
5.BACKLIGHT OFF
6.SSNR3 ON
2. Select a desired mode using the Function Setup switch depending on the camera purpose.
BLC : Enables a user to select a desired area on a picture and view that area more clearly.