12
ENG
13
❚
Installing camera
Before installation
Before installing your camera, you have to read the following cautions:
You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it
may cause a breakdown or fire.
When installing your camera, don’t allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
Installation procedure
To install your camera
1.
Press the
Locker
button on the bottom of your
camera and remove the
Cover dome
from the
Main
body
using the other hand. The Main body and Inner
cover will be exposed to you.
2.
To install and adjust your camera, you have to first
remove the
Inner cover
. To remove the Inner cover
from the Main body, push a long thin screwdriver
into the narrow spot of the
Wing locker
and press it
outward to remove the cover.
3.
Remove the
Mount bracket
from the
Main body
by
rotating the Main body in the UNLOCK direction while
pushing the
Lock releaser
outward. If it is not easily
done, rotate the Mount bracket in the LOCK direction
while holding small holes on the Mount bracket.
4.
Fix the
Mount bracket
to the location (ceiling or wall)
with supplied three screws.
Note
The CAMERA FRONT sign on the
Mount bracket
should face the camera monitoring area.
1
4
3
Ceiling mount
opener
2
AB68-00648C(01)Eng.indd 13
2007-03-19 ¿ÀÀü 10:35:03
