Samsung SCC-B2031P, Руководство пользователя

Страница: 21 / 153

English
–
21
ENG
How to use OSD Menu
r
will
will
nd
ernal
he
f
d in
n
white
ode;
in
DAY/NIGHT mode according to the brightness.
In NIGHT mode, you can set the values of RED ,
BLUE and BRIGHTNESS . The screen will be
displayed in colors according to your settings.
‹
WHITE BAL
‹
DAY/NIGHT NIGHT
BRIGHTNESS MID
MODE AWC
RED [00]----I----
BLUE [00]----I----
R-GAIN [0248]
B-GAIN [0247]
Note
:
You can set the values of
R-GAIN
and
B-GAIN
only in
AWC
mode.
If
AGC
is set to
OFF
or
FIX
, you can not access the
NIGHT
menu.
For adjusting the white balance, the following
5 modes are provided:
ATW1 (Auto Tracing White Balance mode
1): The camera can automatically adjust the
color temperature in real time, according to
the ambient conditions. The color temperature
ranges from approx. 2500K to 9300K.
ATW2 : The color temperature ranges from
approx. 2,000K to 10,000K.
AWC ( Auto White Balance Control): If you
press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.
3200K : Set color temperature to 3200K
5600K : Set color temperature to 5600K
RED : Adjusts the strength of the red color.
BLUE : Adjusts the strength of the blue color.
R-GAIN / B-GAIN : Enables you to set the current
color temperature manually.
BRIGHTNESS : Select a brightness level in
switching from setting in DAY mode to setting in
NIGHT mode.
DIGITAL ZOOM [ON/OFF]

–
–
–
•
•
•
•
•
–
–
–
–
❖
You can set the digital zoom factor and position.
If you press the
SETUP switch with the DIGITAL
ZOOM function set to ON , you will see the
appropriate screen.
When the zoom factor and position are defi ned,
the digital zoom function will operate.
‹ DIGITAL ZOOM ‹
RATIO [X1.0]
< LOCATION >
- LOCATION : If you press the SETUP switch in the
condition where the image is enlarged as much as the
ratio setting, you can watch an invisible area of the
effective screen as well using the
cdef
switch.
Note
:
If the digital zoom factor is set to larger than 1x, the
FENCE
function will be deactivated.
The
DIGITAL ZOOM
function enlarges the pixel itself, which can
cause deterioration of the quality.
DETAIL [0~3]
Controls the horizontal or vertical distinction.
V-SYNC [INT, LINE]
Select the vertical sync mode for INT or LINE .
If you select INT , the camera will use the internal
synchronization.
If selecting LINE , the camera will use the external
power source frequency for the synchronization.
You can adjust the LL-PHASE .

–
❖
❖