Samsung SCB-1001P, Руководство пользователя

Страница: 25 / 32

English_25
●
SETUP


-
MODE : Determines whether to use the area selected.
-
-
SEL POS/POS : Adjust the size and position of the selected area.
-
RETURN : Select this to save the PRIV
WHITE and GRAY.
MASK COLOR : Determine area color. You can select GREEN, RED, BLUE, BLACK,
SYNC
▶
PHASE
*
IIIIIIIIIIIIIIIIIIIII
0
Press SET to Return

syNC : In ar
without using a synchronization signal generator.
ACY menu settings and return to the SPECIAL
menu.
eas where the supply is at
50Hz(PAL), you can synchronize the
output phase of multiple cameras using
the power synchronization function
(Line-Lock)
- INT: Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock

Press the Function Setup switch.

You can select a desired phase from 0 to 359 when select ‘phase’.
When using AC power at 50Hz(PAL) frequency, you can use the L/L type synchronization.
When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.

ReVeRse
: You can reverse the picture.
- OFF : You don’t reverse the picture.
- H-REV : You can flip the picture horizontally on the screen.

shARpNess

COaX
: COAX option is set to "On" will specify the use of coaxial communication.
: As you increase this value, the picture outline becomes stronger and
clearer. Adjust this value appropriately depending on the sharpness of the picture.

SSDR(
samsung super dynamic Range)
1.
SSDR SETUP
▶
LEVEL
IIIIIIIIII
*
IIIIIIIIIII
8
Press SET to Return
SSDR illuminates darker areas of an image while
:
retaining the same light level for brighter areas to
even out the overall brightness of images with
high contrast between bright and dark areas.
When the SETUP menu screen is displayed, select ‘SSDR’ by using the
Function Setup switch so that the arrow indicates ‘SSDR’.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.