Samsung SC-D530, Руководство по обслуживанию

Страница: 30 / 111

Samsung Electronics 4-17
Alignment and Adjustment
Note : "XX XX" indicate the previous preset value and adjusted value. Press the MENU SELECTOR
(Confirm) button to store the adjusted value.
Caution : For whole zoom range, it shall be in focus. The location of a focus lens is moving depending on
the location of zoom lens. During adjusting, micom measures the focus location from a near dis-
tance to a long.
1) Camera is set to E-E mode.
2) Focus chart photo (the last page of manual)
3) Ensure that camera is left an about 3 m distance from a focus chart and the focus of lens is placed verti-
cally. Attach a focus chart to white or gray wall of a flat surface.
4) Connect a video output terminal to a TV.
5) Press the EASY(Mode Up)/CUSTOM(Mode Down) button so that OSD shows "ODE XX XX".
6) Press the MENU SELECTOR (Confirm) button. Never impact on the lens when adjusting zoom and focus
lens. The OSD shows “OK” after finishing the adjustment.
2. Zoom VR center
1) Camera mode & 3100°K gray scale chart.
2) Connect a video output terminal to a TV.
3) Press the EASY(Mode Up)/CUSTOM(Mode Down) button so that OSD shows “OD6 XX XX”.
4) Press the MENU SELECTOR (Confirm) button.
5) Then Micom finds out Zoom VR center position.
Store Zoom VR center value in OB7.
4-2-2 Camera Adjustment
CAMERA ADJ OCD
EPR:XX EVR:XX
(Stored value)
(Adjusted value)
1. LENS ZOOM TRACK
3m +/-1Cm