5
Installing the Software
You can install the device driver for DOS or for Windows
¡
Do not install DOS Driver when the program of Windows 95 is going on.
(Remark CD-ROM Driver in the state of Config. Sys.)
1
Turn on your computer and wait for it to boot.
2
Insert the driver disk into a floppy disk drive(usually the A drive).
3
If you are a...
DOS user
Windows user
Windows 95user
Then :
◆
Type
a:
at the DOS prompt
◆
Press the RETURN key
◆
Access the File Manager
◆
Click on the
A
icon.
◆
Type
CDSETUP
after the
a:
prompt
◆
Press RETURN
Double-click
CDSETUP.EXE
from the Windows
File Manager
◆
When you are in Windows 95, it is not
◆
necessary to install Device Driver.
◆
Whereas, when you are in Dos Mode of
◆
Windows 95, then install as follows.
◆
Click on
MY COMPUTER
icon.
◆
Click on the
A
icon.
4
5
6
Run the CDSETUP program:
To...
Confirm the installation
Y
Exit without installing
N
When the
Setup Completed
screen is displayed, remove the
installation floppy disk from the drive.
7
Reboot your system.
If you answer Y(Yes), the installation program automatically
◆
Creates a SAMSUNG directory on your hard disk
◆
Copies the required softwares (mscdex.exe and sscdrom.sys)
◆
Modifies the CONFIG.SYS and AUTOEXEC.BAT files
Result :
◆
The computer restarts
◆
Both the device driver and MSCDEX are loaded
Result :
Then enter...
If you are a...
Then :
DOS user
Windows user
