Samsung Sbr-100dcm, Руководство пользователя

Страница: 2 / 35

2
GB
1
180mm or above
Ceiling
40mm or less
Overview
CEILING MOUNT BRACKET for camera to be installed on the
ceiling.
SBR-100DCM is a bracket to be used in installing SmartDome
Camera on a double-layered ceiling.
Notice
•
Make sure that the place for installation can stand the weight of about 4kg of the
SmartDome Camera before making installation.
•
Install the device in the spot where more than 180mm in space is provided above the
ceiling board.
•
It can be installed only when the ceiling board is more than 40mm thick.
•
Make sure to use a safety wire that can prevent falling.
•
When you install the camera on the bracket, be sure to use the fixing screw which is
provided with the bracket.
Installation
Drill holes using the template A.
1. First drill 4 holes in ø12.
2. Remove the central part of the template (
“
C
”
).
3.Drill a hole in ø185.
The shape of the hole is as follows:
Install two anchor bolts on the concrete ceiling.
1. Install one in the center the hole of ø185.
•
Determine the length of the anchor bolt using the template B (accessory).
•
Apply a nut to the anchor bolt using template B (accessory) and determine
the location.
2. Tighten another anchor bolt (2) as shown on the following drawing.
1
2
(2) (1)
"D"
158mm
"E"
Template
Anchor bolt
Template B
Ceiling board