14
Connecting to a Power Source
How to charge the rechargeable battery (SLB-10A)
Charging LED
Before inserting any cables or AC adapter, check the directions
and do not insert using force. It may cause breakage of cable or
camera.
If the charging LED of the AC Charger does not turn on or blink
after inserting the rechargeable battery, please check whether the
battery is inserted correctly.
If you charge the battery with the camera power on, the battery
can’t charge fully. Turn the camera off while charging the battery.
x
x
x
Charging LED of the AC Adapter
Charging LED
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
Being discharged
Orange coloured LED is on
- If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. The camera may not be turned on because
of the low battery capacity. Charge the battery for more than 10 minutes
before using the camera.
- Do not use the fl ash frequently or take a movie with the fully discharged
battery charged for a short time. Even if the charger is inserted, the
camera power may be turned off because the rechargeable battery is
discharged again.