Samsung S630 - Digital Camera - Compact Скачать руководство пользователя

Страница: 35 / 105

Ⅲ. ADJUSTMENT

How to use the FULL firmware2

Depending on the camera status, do the full version upgrade.

▷

Reference

- Delete all data in the memory card and upgrade with this firmware.

- When using the full version upgrade, back up the script file as the files will be deleted by the upgrade.

- If the full version upgrade is done by the following way, the script files are saved on the SD card. To upload the

script files, do not remove the SD card and refer to instructions listed below.

- If there are LSCLUT0.BIN, DefectivePixel0.bin, DefectivePixel1.bin files on the SD card, the back up was

complete.

1. Insert the SD card that has the Full version of firmware.

* The firmware file name must be " STS373_full.elf "

2. Use the AC adaptor or fully charged battery.

To upgrade the Firmware, all of the battery level indicator on the LCD monitor must be displayed.

3. Turn on the Camera.

4. Press the Up button twice to select the Voice Recording mode.

Содержание S630 - Digital Camera - Compact










































































































Результаты поиска

Содержание S630 - Digital Camera - Compact

Отзывы:

Похожие инструкции для S630 - Digital Camera - Compact

Бренды по названию

Популярные бренды

Samsung S630 - Digital Camera - Compact, Руководство по обслуживанию

Результаты поиска

Содержание S630 - Digital Camera - Compact

Отзывы:

Похожие инструкции для S630 - Digital Camera - Compact

Бренды по названию

Популярные бренды