There are several access codes that are used by your phone and its RUIM
card. These codes help you protect the phone against unauthorized use.
Phone password
The security code can be used to avoid unauthorized use of your phone. The
security code 0000 is usually supplied with the phone. Change the security
code before you start using your phone. Keep the new code secret and in a
safe place, which is separate from the phone.
PIN code
The PIN (Personal Identification Number) code protects your RUIM card
against unauthorized use. The PIN code is usually supplied with the R-UIM
card. When the PIN code request is enabled, the code is asked each time
the phone is switched on.
If you key in an incorrect PIN code three times in succession, key in the PUK
code and press the key (or key). Key in a new PIN code and press the
key (or key). Key in the new code again and press the key (or key).
PIN2 code
The PIN2 code, supplied with some RUIM cards, is required to access some
functions, such as charging unit counters. These functions are only available
if supported by your RUIM card.
If you key in an incorrect PIN2 code three times in succession, key in the
PUK2 code and press the key (or key). Key in a new PIN2 code and
press the key (or key). Key in the new code again and press the
key (or key).
75
Reference Information
Access Codes
Reference Information
You can enter special characters using Symbol Mode. While entering text,
just change to symbol mode and your phone gives you 28 special characters
in total.
●
To move the cursor up and down, change to symbol mode ( key).
●
To change the page, press the the or key.
●
To select a character you selected, after moving to characters to select by
or key and select one with key.
Number mode is indicated by Num. It enables you to enter numbers into a
text message. Press keys corresponding to the desired digits, and manually
switch back to the text entry mode of choice.
Symbolic mode enables you to enter symbols into a text message.
To scroll through the available symbols, press the up/down key. Press the
corresponding key to insert the desired mark when it is highlighted If finish
symbol mode input, it should change mode by key.
74
Entering Special Characters
Number Mode
Symbol Mode
Text Input ( eZiText )
S500E UserMan/ENG 9/15/04 3:44 PM Page 74
