9
Preparations
Chapter 02
Installation
Attaching the Stand
―
Disassembly is the reverse order of assembly.
S32BG75*N
x 4
1
2
3
4
5
Place the stand neck on the monitor
as shown in the figure.
Fasten the screws at the top of the
stand neck.
Insert the stand base into the stand
neck in the direction as shown in the
figure.
Disassemble the COVER-REAR TOP.
Assemble the COVER-REAR TOP to the stand
neck as shown in the figure.
6
7
8
Rotate the COVER-REAR TOP clockwise.
Stand up the monitor as shown in
the figure.
After installing the stand, place the
product upright.
Caution
Do not arbitrarily remove the panel film. If
not observed, the warranty service may be
restricted.
