25
2.
Specify the color gamut. (Select
sRGB
or
User Settings
.)
Color Gamut
Color Gamut
Calibration
sRGB
Red x :
Green x:
Blue x :
Red y :
Green y:
Blue y :
Back
Next
Brightness
When you select Color Gamut, you can enter RGB X,Y coordinates manually. After you have
entered the coordinates, please press the Next button. If you want to return to the previous step,
press Back.
New Profile
(Standard)
Black Level
White Point
RGB Gamma
3.
Configure the
Brightness
. The brightness level after calibration may depend on the
color temperature.
Brightness
Brightness
Before
After
Back
Next
Cancel
Max.
New Profile
(Standard)
Color Gamut - sRGB
Black Level
White Point
RGB Gamma
To set Maximum Brightness, drag and drop the control bar, press the left and right arrow buttons,
or enter a value in the text box manually. Setting this value to Max. means the maximum value of
brightness available on the monitor. Check the results of your changes by looking at the Current
image, which the changes have been applied to. The accuracy of the preview shown in the
Current image can vary depending on the measurement results of Monitor Measurement. When
you have finished making changes press the Next button. To return to the previous step press the
Back button.
4.
Configure the
Black Level
setting. If you do not adjust the black level setting by
moving the slider button, the minimum brightness will automatically be applied.
Before
Set Black Level Control
Min.
Min.
Back
Next
Cancel
After
Black Level
Color Gamut - sRGB
Brightness - 150 cd
Black Level
White Point
RGB Gamma
New Profile
(Standard)
To set Minimum Brightness, drag and drop the control bar, press the left and right arrow buttons,
or enter a value in the text box manually. Setting this value to Min. means the minimum value of
brightness available on the monitor. Check the results of your changes by looking at the Current
image, which the changes have been applied to. The accuracy of the preview shown in the
Current image can vary depending on the measurement results of Monitor Measurement. When
you have finished making changes press the Next button. To return to the previous step press the
Back button.
5.
Configure the color temperature for
White Point
(range: 4000K – 10000K). To select a
standard brightness, click the
Standard
button.
New Profile
(Standard)
Color Gamut - sRGB
Brightness - 150 cd
Black Level - Min.
White Point
RGB Gamma
To set color temperature or color coordinates. drag and drop the control bar, press the left
and right arrow buttons, or enter a value in the text box manually. If you choose to enter color
coordinates manually, then Color temperature is expressed as N/A. Check the results of your
changes by looking at the Current image, which the changes have been applied to. The accuracy
of the preview shown in the Current image can vary depending on the measurement results of
Monitor Measurement. When you have finished making changes press the Next button. To return
to the previous step press the Back button.
After
Before
Standard
Back
Next
Cancel
White Point
Using NCE (Natural Color Expert)
