9
Chapter 02
Preparations
Installation
Attaching the Stand
― Disassembly is the reverse order of assembly.
7
4
5
1
2
3
6
Put the stand base onto the stand neck as
the direction shown in the figure. Check
that the stand neck is firmly connected.
Tightly fasten the connecting screw
at the bottom of the stand base.
Attach the decoration cover in the direction of the arrow and turn it in clockwise
according to the mark.
Push the assembled
stand into the main body in the direction of the arrow
as shown in the figure.
Caution
Do not arbitrarily remove the panel film. If not
observed, the warranty service may be restricted.
Stand up the monitor as
shown in the figure.
After installing the stand,
place the product upright.