English - 15
01
SETTING
UP
MAKING MINOR
ADJUSTMENTS TO THE
DOORS
Remember, a leveled refrigerator is necessary for
getting the doors perfectly even. If you need help,
review the previous section on leveling the
refrigerator.
Adjustment
part
Fixed part
The left door is fixed. To make minor
adjustments between doors, adjust only
the right door.
1.
Pull out the Convertible door to expose
the lower hinge .
2.
Insert a philips screwdriver (+) into the
shaft of the lower hinge.
3.
Adjust the height by turning a philips
screwdriver (+) clockwise ( ) or
counterclockwise ( ).
When you turn a philips screwdriver (+)
counterclockwise ( ), the door will
move up.
INSTALLING THE WATER
DISPENSER LINE
A water dispenser with a filter is one of the helpful
features on your new refrigerator. To help promote
better health, the water filter removes unwanted
particles from your water. However, it does not
sterilize the water or destroy microorganisms. You
may need to purchase a water purifying system to
do that.
The water line also connects to the ice maker.
For the ice maker to operate properly, water
pressure of 20-125 psi (138 ~ 862 kPa) is
required.
If the refrigerator is installed in an area with low
water pressure (below 20 psi), you can install
a booster pump to compensate for the low
pressure.
After you have connected the water line, make
sure the water storage tank inside the refrigerator
is properly filled. To do this, press the water
dispenser lever until the water runs from the water
outlet.
DA68-02601G-00.indb 15
2014. 12. 4. 3:05
1
2
3
4
3
DOWN
UP
1
2
3
4
3
UP
Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper tubing
and a ¼” compression nut.
