4-4-3. PANEL
If Noisy Video:
1.
Soc T-CON Pattern in Factory Mode
9
Use type of Noise observed (Bars, single lines, video distortion, etc to help.)
•
If noise is only on one half of screen check / swap panel cables.
•
Verify Defective Panel Cables, TV Main/T-CON Board or Panel.
•
If No Video & Back Lights are OK (on):
2.
If sound is OK check Panel 13Vdc supplies to Panel
9
If No sound replace TV Main Board
9
4-19
4. Troubleshooting
