Samsung QN49Q6FAMF, Руководство по обслуживанию

Страница: 23 / 107

3-2
3. Disassembly and Reassemble
Description & Screws Picture Description
3
Use Open Jig to release tape in corners and
all clips as indicated in red on sides and top &
bottom.
Gently lift up the Rear Cover starting at the top
being careful of function assembly at the bottom.
When the Upper 4 points ( • )Hook is
broken.
Although the hook is broken, the appearance
of the Rear cover is no problem and Gap
problem is not appeard after re-assembly.
To prevent the Inner Hook's broken.
•
1. Catch the upper section of the rear cover.
2. Open the rear cover from top to bottom.
If the wire is bent, need to change the wire.
•
Jig Direction Jig Direction
Jig Direction
Bottom
: 4 point Locking
Top
: 10 point Locking
L
: 6 point Locking
R
: 6 point Locking
Center
: 1 Point Locking
Panel Back Side View •
49 / 55 inches
-
4
Remove the Electric tapes, Remove them.
NOTE
When assembling the TV, the electric tapes •
must be applied on the same locations.
Please remember to take a picture of
where the tapes were first applied.
When assembling the Boards, please make •
sure All Board Mounting Clip s are securly
inserted.
Dressing Caution Sliding Fixing Point Filament Tape