manualshive.com logo in svg

Samsung QL 6100, Руководство пользователя

Поделиться
Скачать
Samsung QL 6100 Скачать руководство пользователя страница 30

2.

11

Printer Setup

Printer Driver Installation

Use the following instructions to install the PCL6 and/or PCL5e printer
drivers on a Windows-based PC. The printer driver enables you to 
control the QwikLaser 6100’s features and capabilities (see the table on
the next page). Use the driver’s on-line help for a complete description of
its functionality. If necessary, consult your Windows documentation for
instructions on accessing the driver.
For other software installation procedures, including printer utilities, see
the section “Software Utilities Installation” (page 2.13). 
Before installing the software, verify the following:
• Your PC has at least 16 MB of RAM installed.
• There is at least 20 MB of free disk space on your PC.
• ALL APPLICATIONS ARE CLOSED ON YOUR PC BEFORE 

BEGINNING INSTALLATION. (A system reboot may be required after
the software is installed.)

Windows 95/98/NT 4.0

1. Insert the QwikLaser 6100 CD-ROM into your CD-ROM drive. 

If Windows automatically runs the CD-ROM, skip to Step 4.

2. Select 

Run

from the 

Start

menu.

3. Type 

d:\setup.exe

on the command line (where “d” is your CD-ROM

drive letter), then click 

OK

.

4. Select the appropriate language.

5. Select 

Printer Driver

and follow the on-screen instructions to 

complete the installation.

For Windows 95/98, please reboot once you have completed installation.

Note: The manufacturer recommends the minimal installation of the PCL6 

driver, which contains all the features described in the product description.
Advanced features include Manual Duplex, Multiple Images,
Watermarks, and Booklet Printing.

Windows 3.1x

1. Turn on the printer, then turn on the computer and start Windows.

2. Insert the QwikLaser 6100 CD-ROM into your CD-ROM drive. 

3. Open the Program Manager and select 

Run

from the 

File 

menu.

Содержание QL 6100











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды