English - 7
Connecting to the TV
In order to operate the TV using a Smart Touch Control, you must fi rst pair it to the TV via Bluetooth.
However, the Smart Touch Control is only available for the paired Samsung TV.
1. When the TV is off, point the Smart Touch Control at the remote control receiver of the
TV
and press the TV button for the fi rst pairing. Only this
buttons sends an IR signal.
2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart Touch Control unit
automatically.
<Attempting to connect and completion icons>
Reconnecting the Smart Touch Control
<The Smart Touch Control pairing button>
If you need to reestablish the connection between the TV and the Smart Touch Control, press the pairing button at
the back of the Smart Touch Control. The pairing button can be accessed by removing the Smart Touch Control's
battery cover. Pressing the pairing button automatically reestablishes the connection between the control and the
TV.
Low Battery Power Warning
If the battery becomes and blanks low while using the Smart Touch Control, the following alarm window blinks and appears
at the bottom left of the screen. Use alkaline batteries for longer usage.
Inserting the Batteries (AAA X 2)
1
2
3
1.
Slightly lift the battery cover by pulling the strap or using a plastic card. Next, pull on the cover's notch
with a fi ngernail to remove the cover completely.
2.
Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3.
Align the battery cover with the back of the remote control and press down along the edges until it is
cleanly attached to the remote control.
[PF8500-AR]BN68-04813A-03ENG.indb 7
2013-04-03 �� 3:07:08
