English - 7
P
POWER
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the
POWER
P
button.
Plug & Play
is available only when the
Source
is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
1
Selecting a language Press the
▲
or
▼
button, then press the
ENTER
E
button.
Select the desired OSD (On Screen Display) language.
2
Setting the Network
Set up your network connection. Press the
ENTER
E
button
to start. If you want to setting to it later, select
Skip
. For more
information, refer to “Wired / Wireless Network Connection” in the
e-Manual.
3
Software upgrade
When network connection settings are complete, Software Upgrade is available.
Select
Next
to upgrade TV software. Your TV will automatically upgrade, if your
TV need a software upgrade. If you want to upgrade later, select the
Skip
. For
more information, refer to “Software Upgrade” (Preference Features
→
Support
Menu) in the e-Manual.
✎
This may take some time, depending on network status.
4
Selecting
Store
Demo
or
Home Use
Press the
◄
or
►
button, then press the
ENTER
E
button.
Select the
Home Use
mode.
Store Demo
mode is for retail environments.
To return the unit’s settings from
Store Demo
to
Home Use
(standard): Press the
volume button on the TV. When you see the volume OSD, press and hold
MENU
for 5 sec.
Store Demo
is only for shop display. If you select it, several functions are not able
to use. Please select
Home Use
when you watch at home.
5
Selecting a country
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the
appropriate country.
✎
After selecting the country in the
Country
menu, some models may proceed
with an additional option to setup the pin number.
✎
When you input the PIN number, “0-0-0-0” is not available.
6
Setting the
Clock
Mode
Set the
Clock Mode
automatically or manually.
7
Selecting an antenna Press the
▲
or
▼
button, then press the
ENTER
E
button. Select
Air
,
Cable
or
Satellite
. The option may differ depending on country.
8
Selecting a channel
Press the
▲
or
▼
button, then press the
ENTER
E
button. Select the channel
source to memorise. When setting the antenna source to
Cable
, a step appears
allowing you to assign numerical values (channel frequencies) to the channels.
For more information, refer to Channel
→
Memorising Channels in the e-Manual.
✎
When
Air
or
Cable
is selected first: After all
Air
or
Cable
channels are
stored, the step for storing
Satellite
channels is displayed.
✎
When
Satellite
is selected first: After all
Satellite
channels are stored, the
step for storing
Air
or
Cable
channels is displayed.
✎
Press the
ENTER
E
button at any time to interrupt the memorisation
process.
9
Enjoy your TV.
Press the
ENTER
E
button.
If You Want to Reset This Feature...
Select
System
-
Plug & Play
(Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the
Change PIN
function.
You should do
Plug & Play
(
MENU
→
System
) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to “0-0-0-0”:
MUTE
→
8
→
2
→
4
→
POWER
(on).
[PD6900-XU]BN68-03421K-00Eng.indb 7
2011-03-08 오후 3:11:47
