Samsung PS50A556S2F, Руководство пользователя

Страница: 22 / 65

English -
− Pixel Shift : Using this function, you can minutely move
pixels on the PDP in horizontal or vertical direction to
minimize after image on the screen.
− Set Pixel Shift to On by pressing the ▲ or ▼ button,
then press the ENTER button.
− Select the required option by pressing the ▲ or ▼
button, then press the ENTER button.
Available options:
Horizontal Dot
,
Vertical Line
,
Time

Optimum condition for pixel shift;
PC
TV/Ext/AV/Component/
HDMI/DTV
Horizontal Dot 4 4
Vertical Line 4 4
Timer (minute) 4 4 min

The Pixel Shift value may differ depending on the monitor size (inches) and mode.
− White : This function helps remove after images on the screen by changing the colour of pixels
to white. Use this function when there are remaining after images or symbols on the screen
especially when you displayed a still image on the screen for a long time.
− Scrolling : This function helps remove after images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after images or symbols
on the screen especially when you displayed a still image on the screen for a long time.
− Side Gray : When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
Dark : When you set the screen ratio to 4:3, it darkens the left and right sides.
Light : When you set the screen ratio to 4:3, it brightens the left and right sides.

To remove after images on the screen, use either White or Scrolling function. Although both of
the two functions remove after images on the screen, Scrolling is more effective.

The after image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after images on the screen. If after image is not improved after the execution
of the function, repeat the function again.

Press any button on the remote control to cancel this feature.
Resetting the Picture Settings to the Factory Defaults
You can set detailed picture settings.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture .
Press the ▲ or ▼ button to select Reset , then press the
ENTER button.
4 Press the ▲ or ▼ button to select OK or Cancel then press
the ENTER button.

Each mode can be reset.
Move
Enter Return

More
Picture Options
Reset : OK
Picture
T V
OK
Cancel
Move
Enter Return
Pixel Shift : On 
Horizontal Dot :

Vertical Line :

Timer : min

Pixel Shift T V
BN68-01427D-Eng.indb 22 2008-03-10 오후 3:24:00