Samsung POWERbot VR20J9250U Series, Руководство пользователя

Страница: 30 / 144

ENGLISH-
30
information codes
1
Below information
codes appear on
the display panel
2
Turn off the
emergency switch
and check the below
instructions and take
appropriate action
3
Information code
will disappear
when you turn on
the emergency
switch
Information codes checklist
the poWerbot is caught, stuck or trapped while
moving around.
f
Turn off the emergency switch and move the POWERbot to another
area.
foreign matter caught in the power brush.
f
Turn off the emergency switch and remove the foreign matter from the
Power brush.
foreign matter caught in the left Driving wheel.
f
Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
foreign matter caught in the right Driving wheel.
f Turn off the emergency switch and remove the foreign matter from the
Driving wheel.
Bumper sensor needs to be checked.
f Turn off the emergency switch and turn it back on.
f
When information code does not disappear, check if there's any small
foreign matter between the bumper and the main body. If there is, pull
the bumper slightly and remove the foreign matter.
foreign matter accumulated on the obstacle sensor.
f
Turn off the emergency switch and clean the front and rear sensor
with a soft cloth.
foreign matter accumulated on the cliff sensor.
f Turn off the emergency switch and clean the cliff sensor with a soft
cloth.
1_SR9200J_EN_DJ68-00732C-00.indd 30 2015-06-10 오전 11:53:10