Samsung PN51D490A1DXZA, Электронное руководство

Страница: 9 / 243

Plug & Play (Initial Setup)
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, press the
POWER
3
button.
✎
Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step in the Plug & Play sequence, press the red button, and then press ENTER
(
.
✎
Before turning on the TV, make sure you have connected the TV to an antenna or cable connection (p. 8).
1 Selecting the OSD
Language
Press the or button to select a language. Press ENTER
(
twice
when done.
2
Selecting the usage
mode Press the or button to select Home Use , and then press the
ENTER
(
button twice.
Select Home Use mode. Store Demo mode is for retail environments.
3
Setting the Clock
Mode
Press the or button to select Auto or Manual , and then press ENTER
(
twice.
✎
If you selected Auto , you’ll go to the Time Zone and DST screen. Select Time Zone
or DST , and then press ENTER
(
. On the Time Zone screen, use the or
button to select your zone, and then press ENTER
(
. On the DST screen, press,
ENTER
(
, then select whether to turn DST (Daylight Savings Time) on or off. When
done, press ENTER
(
.
✎
If you selected Manual , you’ll go to the Date and Time screen. Select Date or Time ,
and then press ENTER
(
. Then, use the number buttons or the or button to
set the date or time. Use the or button to move between entry fields. When
done setting the Date and Time , select Next , and then press ENTER
(
.
4
Selecting search
options for auto tuning Press the or button to select Air or Cable , and then press ENTER
(
. A check
appears on your selection. Select Next , and then press the ENTER
(
button. You can
check both if you have both connected.
✎
If you selected Cable , you’ll go to the Cable System screen. Use the or button
to select Digital or Analog , and then press. ENTER
(
. Use the or button
to select the correct cable signal format - STD , HRC , or IRC - and then press
ENTER
(
. Most cable systems use STD . Select the correct cable signal format for
both the Digital and Analog systems.
When done, select Next , and the press ENTER
(
.
5 Selecting and
memorizing channels The channel search will start automatically. This can take up to 30 minutes.
For more information, refer to
Channel
1
Auto Program in the e-Manual.
✎
Press the ENTER
(
button at any time to interrupt the memorization process.
6
Enjoy your TV .
Press the ENTER
(
button.
If You Want to Rerun Plug & Play...
"
MENU
1
System
1
Plug & Play
1
ENTER
(
✎
NOTE
y
To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume bar on the screen, press and hold the MENU button on the TV for 5 sec.
P
POWER